🛠️ Department 56 "Disney Fab Five" Motor Replacement Guide
Bring your Department 56 Swinging Disney Fab Five (Model# 58.56866) back to life with this polished, step-by-step repair guide. This procedure utilizes the Happy Holidays Parts drop-in replacement kit (featuring the P-1 12V-AC-CW synchronous motor) and handy disassembly techniques credited to Brad M. from Boca, FL.
🧰 Tools & Materials Needed
Replacement Kit: Happy Holidays Parts 12V AC synchronous motor (5-6 RPM, Clockwise, 4W, Left-handed thread custom shaft)
Heat Source: Heat gun or high-powered hair dryer
Prying Tools: Flathead screwdriver, putty knife, or plastic pry tools
Scraping Tools: Small chisel or utility knife
Adhesives & Electronics: Hot glue gun, super glue, and wire connectors or a soldering iron
📋 Step-by-Step Repair Instructions
De-cap the Base: Apply targeted heat around the seam of the blue top cap on the motorized base to soften the factory adhesive. Insert your prying tool into the seam and gently work your way around until the blue top pops off.
Clear the Waxy Resin: Locate the internal motor assembly, which is encased in a protective white, waxy resin. Lightly heat the resin to soften it, then use a small chisel or knife to carefully scrape it away until the mounting screws are completely exposed.
Extract the Old Motor: Unscrew the faulty motor from its factory mount. Snip or desolder the power wires to completely free the old unit.
Drop in the Replacement: Position the new synchronous motor onto the original mount and secure it with the mounting screws. Pro-tip: Apply a liberal layer of hot glue around the mounting arms for extra structural reinforcement.
Wire, Test, and Seal: Reconnect the power wires securely. Plug the unit in briefly to verify the smooth, clockwise movement of the shaft. Once confirmed, apply hot glue or super glue to the rim of the base and press the blue top firmly back into place.
To ensure the repair goes perfectly, let me know if you need help with:
Identifying your shaft type to verify it matches the left-handed thread.
Wiring safety tips if you are choosing between soldering or crimp connectors.
Managing the heat gun so you don't accidentally warp the blue plastic housing.
AVAILABLE IN OUR STORE TO PURCHASE
Spade crimp terminal with sleeve 16. AWG wire red and black.




